# Objective
Remove the `new_with_` prefixes from the `TextLayout` constuctor
functions. Generally, the "new" part is redundant and "with" is used by
fluent APIs.
## Solution
Just delete the prefixes, shorten the names (all on `TextLayout`).
* `new_with_justify` -> `justify`
* `new_with_linebreak` -> `linebreak`
* `new_with_no_wrap` -> `no_wrap`
# Objective
Add responsive font sizes supporting rem and viewport units to
`bevy_text` with minimal changes to the APIs and systems.
## Solution
Introduce a new `FontSize` enum:
```rust
pub enum FontSize {
/// Font Size in logical pixels.
Px(f32),
/// Font size as a percentage of the viewport width.
Vw(f32),
/// Font size as a percentage of the viewport height.
Vh(f32),
/// Font size as a percentage of the smaller of the viewport width and height.
VMin(f32),
/// Font size as a percentage of the larger of the viewport width and height.
VMax(f32),
/// Font Size relative to the value of the `RemSize` resource.
Rem(f32),
}
```
This replaces the `f32` value of `TextFont`'s `font_size` field.
The viewport variants work the same way as their respective `Val`
counterparts.
`Rem` values are multiplied by the value of the `RemSize` resource
(which newtypes an `f32`).
`FontSize` provides an `eval` method that takes a logical viewport size
and rem base size and returns an `f32` logical font size. The resolved
logical font size is then written into the `Attributes` passed to Cosmic
Text by `TextPipeline::update_buffer`.
Any text implementation using `bevy_text` must now provide viewport and
rem base values when calling `TextPipeline::update_buffer` or
`create_measure`.
`Text2d` uses the size of the primary window to resolve viewport values
(or `Vec2::splat(1000)` if no primary window is found). This is a
deliberate compromise, a single `Text2d` can be rendered to multiple
viewports using `RenderLayers`, so it's difficult to find a rule for
which viewport size should be chosen.
### Change detection
`ComputedTextBlock` has two new fields: `uses_viewport_sizes` and
`uses_rem_sizes`, which are set to true in `TextPipeline::update_buffer`
iff any text section in the block uses viewport or rem font sizes,
respectively.
The `ComputedTextBlock::needs_rerender` method has been modified to take
take two bool parameters:
```rust
pub fn needs_rerender(
&self,
is_viewport_size_changed: bool,
is_rem_size_changed: bool,
) -> bool {
self.needs_rerender
|| (is_viewport_size_changed && self.uses_viewport_sizes)
|| (is_rem_size_changed && self.uses_rem_sizes)
}
```
This ensures that text reupdates will also be scheduled if one of the text section's uses a viewport font size and the local viewport size changed, or if one of the text section's uses a rem font size and the rem size changed.
#### Limitations
There are some limitations because we don't have any sort of font style inheritance yet:
* "rem" units aren't proper rem units, and just based on the value of a resource.
* "em" units are resolved based on inherited font size, so can't be implemented without inheritance support.
#### Notes
* This PR is quite small and not very technical. Reviewers don't need to be especially familiar with `bevy_text`. Most of the changes are to the examples.
* We could consider using `Val` instead of `FontSize`, then we could use `Val`'s constructor functions which would be much nicer, but some variants might not have sensible interpretations in both UI and Text2d contexts. Also we'd have to make `Val` accessible to `bevy_text`.
## Testing
The changes to the text systems are relatively trivial and easy to understand. I already added a minor change to the `text` example to use `Vh` font size for the "hello bevy" text in the bottom right corner. If you change the size of the window, you should see the text change size in response. The text initially flickers before it updates because of some unrelated asset/image changes that mean that font textures aren't ready until the frame after the text update that changes the font size.
Most of the example migrations were automated using regular expressions, and there are bound to be mistakes in those changes. It's infeasible to check every single example thoroughly, but it's early enough in the release cycle that I don't think we should be too worried if a few bugs slip in.
---------
Co-authored-by: Kevin Chen <chen.kevin.f@gmail.com>
# Objective
I was looking at the diff of
https://github.com/bevyengine/bevy/pull/22207 and noticed there is a bit
of code duplication.
## Solution
Move the toggle functionality into a function, update the examples.
## Testing
- Tested by running the examples and toggling time.
# Objective
- Allow the `Val`-helper functions to accept more types besides just
`f32`
Fixes#20549
## Solution
- Adds a new trait that can be implemented for numbers
- That trait has a method that converts `self` to `f32`
## Testing
- I tested it using Rust's testing framework (although I didn't leave
the tests in, as I don't deem them important enough)
<details>
<summary>Rust test</summary>
```rust
#[cfg(test)]
mod tests {
use super::*;
#[test]
fn test_val_helpers_work() {
let p = px(10_u8);
assert_eq!(p, Val::Px(10.0));
let p = px(10_u16);
assert_eq!(p, Val::Px(10.0));
let p = px(10_u32);
assert_eq!(p, Val::Px(10.0));
let p = px(10_u64);
assert_eq!(p, Val::Px(10.0));
let p = px(10_u128);
assert_eq!(p, Val::Px(10.0));
let p = px(10_i8);
assert_eq!(p, Val::Px(10.0));
let p = px(10_i16);
assert_eq!(p, Val::Px(10.0));
let p = px(10_i32);
assert_eq!(p, Val::Px(10.0));
let p = px(10_i64);
assert_eq!(p, Val::Px(10.0));
let p = px(10_i128);
assert_eq!(p, Val::Px(10.0));
let p = px(10.3_f32);
assert_eq!(p, Val::Px(10.3));
let p = px(10.6_f64);
assert_eq!(p, Val::Px(10.6));
}
}
```
</details>
---
## Showcase
```rust
// Same as Val::Px(10.)
px(10);
px(10_u8);
px(10.0);
```
# Objective
Rename `JustifyText`:
* The name `JustifyText` is just ugly.
* It's inconsistent since no other `bevy_text` types have a `Text-`
suffix, only prefix.
* It's inconsistent with the other text layout enum `Linebreak` which
doesn't have a prefix or suffix.
Fixes#19521.
## Solution
Rename `JustifyText` to `Justify`.
Without other context, it's natural to assume the name `Justify` refers
to text justification.
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
Renames `Timer::finished` and `Timer::paused` to `Timer::is_finished`
and `Timer::is_paused` to align the public APIs for `Time`, `Timer`, and
`Stopwatch`.
Fixes#19110
# Objective
Contributes to #18238
Updates the `text_input` and `virtual_time` examples to use the
`children!` macro. I wanted to keep the PR small but chose to do two
examples since they both included only a single `with_children` call.
## Solution
Updates examples to use the Improved Spawning API merged in
https://github.com/bevyengine/bevy/pull/17521
## Testing
- Did you test these changes? If so, how?
- Opened the examples before and after and verified the same behavior
was observed. I did this on Ubuntu 24.04.2 LTS using `--features
wayland`.
- Are there any parts that need more testing?
- Other OS's and features can't hurt, but this is such a small change it
shouldn't be a problem.
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
- Run the examples yourself with and without these changes.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
- see above
---
## Showcase
n/a
## Migration Guide
n/a
# Objective
Continue improving the user experience of our UI Node API in the
direction specified by [Bevy's Next Generation Scene / UI
System](https://github.com/bevyengine/bevy/discussions/14437)
## Solution
As specified in the document above, merge `Style` fields into `Node`,
and move "computed Node fields" into `ComputedNode` (I chose this name
over something like `ComputedNodeLayout` because it currently contains
more than just layout info. If we want to break this up / rename these
concepts, lets do that in a separate PR). `Style` has been removed.
This accomplishes a number of goals:
## Ergonomics wins
Specifying both `Node` and `Style` is now no longer required for
non-default styles
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
## Conceptual clarity
`Style` was never a comprehensive "style sheet". It only defined "core"
style properties that all `Nodes` shared. Any "styled property" that
couldn't fit that mold had to be in a separate component. A "real" style
system would style properties _across_ components (`Node`, `Button`,
etc). We have plans to build a true style system (see the doc linked
above).
By moving the `Style` fields to `Node`, we fully embrace `Node` as the
driving concept and remove the "style system" confusion.
## Next Steps
* Consider identifying and splitting out "style properties that aren't
core to Node". This should not happen for Bevy 0.15.
---
## Migration Guide
Move any fields set on `Style` into `Node` and replace all `Style`
component usage with `Node`.
Before:
```rust
commands.spawn((
Node::default(),
Style {
width: Val::Px(100.),
..default()
},
));
```
After:
```rust
commands.spawn(Node {
width: Val::Px(100.),
..default()
});
```
For any usage of the "computed node properties" that used to live on
`Node`, use `ComputedNode` instead:
Before:
```rust
fn system(nodes: Query<&Node>) {
for node in &nodes {
let computed_size = node.size();
}
}
```
After:
```rust
fn system(computed_nodes: Query<&ComputedNode>) {
for computed_node in &computed_nodes {
let computed_size = computed_node.size();
}
}
```
Fixes#15834
## Migration Guide
The APIs of `Time`, `Timer` and `Stopwatch` have been cleaned up for
consistency with each other and the standard library's `Duration` type.
The following methods have been renamed:
- `Stowatch::paused` -> `Stopwatch::is_paused`
- `Time::elapsed_seconds` -> `Time::elasped_secs` (including `_f64` and
`_wrapped` variants)
# Objective
Currently text is recomputed unnecessarily on any changes to its color,
which is extremely expensive.
## Solution
Split up `TextStyle` into two separate components `TextFont` and
`TextColor`.
## Testing
I added this system to `many_buttons`:
```rust
fn set_text_colors_changed(mut colors: Query<&mut TextColor>) {
for mut text_color in colors.iter_mut() {
text_color.set_changed();
}
}
```
reports ~4fps on main, ~50fps with this PR.
## Migration Guide
`TextStyle` has been renamed to `TextFont` and its `color` field has
been moved to a separate component named `TextColor` which newtypes
`Color`.
**Ready for review. Examples migration progress: 100%.**
# Objective
- Implement https://github.com/bevyengine/bevy/discussions/15014
## Solution
This implements [cart's
proposal](https://github.com/bevyengine/bevy/discussions/15014#discussioncomment-10574459)
faithfully except for one change. I separated `TextSpan` from
`TextSpan2d` because `TextSpan` needs to require the `GhostNode`
component, which is a `bevy_ui` component only usable by UI.
Extra changes:
- Added `EntityCommands::commands_mut` that returns a mutable reference.
This is a blocker for extension methods that return something other than
`self`. Note that `sickle_ui`'s `UiBuilder::commands` returns a mutable
reference for this reason.
## Testing
- [x] Text examples all work.
---
## Showcase
TODO: showcase-worthy
## Migration Guide
TODO: very breaking
### Accessing text spans by index
Text sections are now text sections on different entities in a
hierarchy, Use the new `TextReader` and `TextWriter` system parameters
to access spans by index.
Before:
```rust
fn refresh_text(mut query: Query<&mut Text, With<TimeText>>, time: Res<Time>) {
let text = query.single_mut();
text.sections[1].value = format_time(time.elapsed());
}
```
After:
```rust
fn refresh_text(
query: Query<Entity, With<TimeText>>,
mut writer: UiTextWriter,
time: Res<Time>
) {
let entity = query.single();
*writer.text(entity, 1) = format_time(time.elapsed());
}
```
### Iterating text spans
Text spans are now entities in a hierarchy, so the new `UiTextReader`
and `UiTextWriter` system parameters provide ways to iterate that
hierarchy. The `UiTextReader::iter` method will give you a normal
iterator over spans, and `UiTextWriter::for_each` lets you visit each of
the spans.
---------
Co-authored-by: ickshonpe <david.curthoys@googlemail.com>
Co-authored-by: Carter Anderson <mcanders1@gmail.com>
# Objective
Continue migration of bevy APIs to required components, following
guidance of https://hackmd.io/@bevy/required_components/
## Solution
- Make `Sprite` require `Transform` and `Visibility` and
`SyncToRenderWorld`
- move image and texture atlas handles into `Sprite`
- deprecate `SpriteBundle`
- remove engine uses of `SpriteBundle`
## Testing
ran cargo tests on bevy_sprite and tested several sprite examples.
---
## Migration Guide
Replace all uses of `SpriteBundle` with `Sprite`. There are several new
convenience constructors: `Sprite::from_image`,
`Sprite::from_atlas_image`, `Sprite::from_color`.
WARNING: use of `Handle<Image>` and `TextureAtlas` as components on
sprite entities will NO LONGER WORK. Use the fields on `Sprite` instead.
I would have removed the `Component` impls from `TextureAtlas` and
`Handle<Image>` except it is still used within ui. We should fix this
moving forward with the migration.
# Objective
Yet another PR for migrating stuff to required components. This time,
cameras!
## Solution
As per the [selected
proposal](https://hackmd.io/tsYID4CGRiWxzsgawzxG_g#Combined-Proposal-1-Selected),
deprecate `Camera2dBundle` and `Camera3dBundle` in favor of `Camera2d`
and `Camera3d`.
Adding a `Camera` without `Camera2d` or `Camera3d` now logs a warning,
as suggested by Cart [on
Discord](https://discord.com/channels/691052431525675048/1264881140007702558/1291506402832945273).
I would personally like cameras to work a bit differently and be split
into a few more components, to avoid some footguns and confusing
semantics, but that is more controversial, and shouldn't block this core
migration.
## Testing
I ran a few 2D and 3D examples, and tried cameras with and without
render graphs.
---
## Migration Guide
`Camera2dBundle` and `Camera3dBundle` have been deprecated in favor of
`Camera2d` and `Camera3d`. Inserting them will now also insert the other
components required by them automatically.
# Objective
- Fixes#15236
## Solution
- Use bevy_math::ops instead of std floating point operations.
## Testing
- Did you test these changes? If so, how?
Unit tests and `cargo run -p ci -- test`
- How can other people (reviewers) test your changes? Is there anything
specific they need to know?
Execute `cargo run -p ci -- test` on Windows.
- If relevant, what platforms did you test these changes on, and are
there any important ones you can't test?
Windows
## Migration Guide
- Not a breaking change
- Projects should use bevy math where applicable
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
Co-authored-by: IQuick 143 <IQuick143cz@gmail.com>
Co-authored-by: Joona Aalto <jondolf.dev@gmail.com>
# Objective
Closes#13017.
## Solution
- Make `AppExit` a enum with a `Success` and `Error` variant.
- Make `App::run()` return a `AppExit` if it ever returns.
- Make app runners return a `AppExit` to signal if they encountered a
error.
---
## Changelog
### Added
- [`App::should_exit`](https://example.org/)
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
to the `bevy` and `bevy_app` preludes,
### Changed
- [`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
is now a enum with 2 variants (`Success` and `Error`).
- The app's [runner
function](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.set_runner)
now has to return a `AppExit`.
-
[`App::run()`](https://docs.rs/bevy/latest/bevy/app/struct.App.html#method.run)
now also returns the `AppExit` produced by the runner function.
## Migration Guide
- Replace all usages of
[`AppExit`](https://docs.rs/bevy/latest/bevy/app/struct.AppExit.html)
with `AppExit::Success` or `AppExit::Failure`.
- Any custom app runners now need to return a `AppExit`. We suggest you
return a `AppExit::Error` if any `AppExit` raised was a Error. You can
use the new [`App::should_exit`](https://example.org/) method.
- If not exiting from `main` any other way. You should return the
`AppExit` from `App::run()` so the app correctly returns a error code if
anything fails e.g.
```rust
fn main() -> AppExit {
App::new()
//Your setup here...
.run()
}
```
---------
Co-authored-by: Alice Cecile <alice.i.cecile@gmail.com>
# Objective
This is a necessary precursor to #9122 (this was split from that PR to
reduce the amount of code to review all at once).
Moving `!Send` resource ownership to `App` will make it unambiguously
`!Send`. `SubApp` must be `Send`, so it can't wrap `App`.
## Solution
Refactor `App` and `SubApp` to not have a recursive relationship. Since
`SubApp` no longer wraps `App`, once `!Send` resources are moved out of
`World` and into `App`, `SubApp` will become unambiguously `Send`.
There could be less code duplication between `App` and `SubApp`, but
that would break `App` method chaining.
## Changelog
- `SubApp` no longer wraps `App`.
- `App` fields are no longer publicly accessible.
- `App` can no longer be converted into a `SubApp`.
- Various methods now return references to a `SubApp` instead of an
`App`.
## Migration Guide
- To construct a sub-app, use `SubApp::new()`. `App` can no longer
convert into `SubApp`.
- If you implemented a trait for `App`, you may want to implement it for
`SubApp` as well.
- If you're accessing `app.world` directly, you now have to use
`app.world()` and `app.world_mut()`.
- `App::sub_app` now returns `&SubApp`.
- `App::sub_app_mut` now returns `&mut SubApp`.
- `App::get_sub_app` now returns `Option<&SubApp>.`
- `App::get_sub_app_mut` now returns `Option<&mut SubApp>.`
# Objective
- As part of the migration process we need to a) see the end effect of
the migration on user ergonomics b) check for serious perf regressions
c) actually migrate the code
- To accomplish this, I'm going to attempt to migrate all of the
remaining user-facing usages of `LegacyColor` in one PR, being careful
to keep a clean commit history.
- Fixes#12056.
## Solution
I've chosen to use the polymorphic `Color` type as our standard
user-facing API.
- [x] Migrate `bevy_gizmos`.
- [x] Take `impl Into<Color>` in all `bevy_gizmos` APIs
- [x] Migrate sprites
- [x] Migrate UI
- [x] Migrate `ColorMaterial`
- [x] Migrate `MaterialMesh2D`
- [x] Migrate fog
- [x] Migrate lights
- [x] Migrate StandardMaterial
- [x] Migrate wireframes
- [x] Migrate clear color
- [x] Migrate text
- [x] Migrate gltf loader
- [x] Register color types for reflection
- [x] Remove `LegacyColor`
- [x] Make sure CI passes
Incidental improvements to ease migration:
- added `Color::srgba_u8`, `Color::srgba_from_array` and friends
- added `set_alpha`, `is_fully_transparent` and `is_fully_opaque` to the
`Alpha` trait
- add and immediately deprecate (lol) `Color::rgb` and friends in favor
of more explicit and consistent `Color::srgb`
- standardized on white and black for most example text colors
- added vector field traits to `LinearRgba`: ~~`Add`, `Sub`,
`AddAssign`, `SubAssign`,~~ `Mul<f32>` and `Div<f32>`. Multiplications
and divisions do not scale alpha. `Add` and `Sub` have been cut from
this PR.
- added `LinearRgba` and `Srgba` `RED/GREEN/BLUE`
- added `LinearRgba_to_f32_array` and `LinearRgba::to_u32`
## Migration Guide
Bevy's color types have changed! Wherever you used a
`bevy::render::Color`, a `bevy::color::Color` is used instead.
These are quite similar! Both are enums storing a color in a specific
color space (or to be more precise, using a specific color model).
However, each of the different color models now has its own type.
TODO...
- `Color::rgba`, `Color::rgb`, `Color::rbga_u8`, `Color::rgb_u8`,
`Color::rgb_from_array` are now `Color::srgba`, `Color::srgb`,
`Color::srgba_u8`, `Color::srgb_u8` and `Color::srgb_from_array`.
- `Color::set_a` and `Color::a` is now `Color::set_alpha` and
`Color::alpha`. These are part of the `Alpha` trait in `bevy_color`.
- `Color::is_fully_transparent` is now part of the `Alpha` trait in
`bevy_color`
- `Color::r`, `Color::set_r`, `Color::with_r` and the equivalents for
`g`, `b` `h`, `s` and `l` have been removed due to causing silent
relatively expensive conversions. Convert your `Color` into the desired
color space, perform your operations there, and then convert it back
into a polymorphic `Color` enum.
- `Color::hex` is now `Srgba::hex`. Call `.into` or construct a
`Color::Srgba` variant manually to convert it.
- `WireframeMaterial`, `ExtractedUiNode`, `ExtractedDirectionalLight`,
`ExtractedPointLight`, `ExtractedSpotLight` and `ExtractedSprite` now
store a `LinearRgba`, rather than a polymorphic `Color`
- `Color::rgb_linear` and `Color::rgba_linear` are now
`Color::linear_rgb` and `Color::linear_rgba`
- The various CSS color constants are no longer stored directly on
`Color`. Instead, they're defined in the `Srgba` color space, and
accessed via `bevy::color::palettes::css`. Call `.into()` on them to
convert them into a `Color` for quick debugging use, and consider using
the much prettier `tailwind` palette for prototyping.
- The `LIME_GREEN` color has been renamed to `LIMEGREEN` to comply with
the standard naming.
- Vector field arithmetic operations on `Color` (add, subtract, multiply
and divide by a f32) have been removed. Instead, convert your colors
into `LinearRgba` space, and perform your operations explicitly there.
This is particularly relevant when working with emissive or HDR colors,
whose color channel values are routinely outside of the ordinary 0 to 1
range.
- `Color::as_linear_rgba_f32` has been removed. Call
`LinearRgba::to_f32_array` instead, converting if needed.
- `Color::as_linear_rgba_u32` has been removed. Call
`LinearRgba::to_u32` instead, converting if needed.
- Several other color conversion methods to transform LCH or HSL colors
into float arrays or `Vec` types have been removed. Please reimplement
these externally or open a PR to re-add them if you found them
particularly useful.
- Various methods on `Color` such as `rgb` or `hsl` to convert the color
into a specific color space have been removed. Convert into
`LinearRgba`, then to the color space of your choice.
- Various implicitly-converting color value methods on `Color` such as
`r`, `g`, `b` or `h` have been removed. Please convert it into the color
space of your choice, then check these properties.
- `Color` no longer implements `AsBindGroup`. Store a `LinearRgba`
internally instead to avoid conversion costs.
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
Co-authored-by: Afonso Lage <lage.afonso@gmail.com>
Co-authored-by: Rob Parrett <robparrett@gmail.com>
Co-authored-by: Zachary Harrold <zac@harrold.com.au>
# Objective
The migration process for `bevy_color` (#12013) will be fairly involved:
there will be hundreds of affected files, and a large number of APIs.
## Solution
To allow us to proceed granularly, we're going to keep both
`bevy_color::Color` (new) and `bevy_render::Color` (old) around until
the migration is complete.
However, simply doing this directly is confusing! They're both called
`Color`, making it very hard to tell when a portion of the code has been
ported.
As discussed in #12056, by renaming the old `Color` type, we can make it
easier to gradually migrate over, one API at a time.
## Migration Guide
THIS MIGRATION GUIDE INTENTIONALLY LEFT BLANK.
This change should not be shipped to end users: delete this section in
the final migration guide!
---------
Co-authored-by: Alice Cecile <alice.i.cecil@gmail.com>
# Objective
Currently the `missing_docs` lint is allowed-by-default and enabled at
crate level when their documentations is complete (see #3492).
This PR proposes to inverse this logic by making `missing_docs`
warn-by-default and mark crates with imcomplete docs allowed.
## Solution
Makes `missing_docs` warn at workspace level and allowed at crate level
when the docs is imcomplete.
# Objective
- Update winit dependency to 0.29
## Changelog
### KeyCode changes
- Removed `ScanCode`, as it was [replaced by
KeyCode](https://github.com/rust-windowing/winit/blob/master/CHANGELOG.md#0292).
- `ReceivedCharacter.char` is now a `SmolStr`, [relevant
doc](https://docs.rs/winit/latest/winit/event/struct.KeyEvent.html#structfield.text).
- Changed most `KeyCode` values, and added more.
KeyCode has changed meaning. With this PR, it refers to physical
position on keyboard rather than the printed letter on keyboard keys.
In practice this means:
- On QWERTY keyboard layouts, nothing changes
- On any other keyboard layout, `KeyCode` no longer reflects the label
on key.
- This is "good". In bevy 0.12, when you used WASD for movement, users
with non-QWERTY keyboards couldn't play your game! This was especially
bad for non-latin keyboards. Now, WASD represents the physical keys. A
French player will press the ZQSD keys, which are near each other,
Kyrgyz players will use "Цфыв".
- This is "bad" as well. You can't know in advance what the label of the
key for input is. Your UI says "press WASD to move", even if in reality,
they should be pressing "ZQSD" or "Цфыв". You also no longer can use
`KeyCode` for text inputs. In any case, it was a pretty bad API for text
input. You should use `ReceivedCharacter` now instead.
### Other changes
- Use `web-time` rather than `instant` crate.
(https://github.com/rust-windowing/winit/pull/2836)
- winit did split `run_return` in `run_onDemand` and `pump_events`, I
did the same change in bevy_winit and used `pump_events`.
- Removed `return_from_run` from `WinitSettings` as `winit::run` now
returns on supported platforms.
- I left the example "return_after_run" as I think it's still useful.
- This winit change is done partly to allow to create a new window after
quitting all windows: https://github.com/emilk/egui/issues/1918 ; this
PR doesn't address.
- added `width` and `height` properties in the `canvas` from wasm
example
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1420567168)
## Known regressions (important follow ups?)
- Provide an API for reacting when a specific key from current layout
was released.
- possible solutions: use winit::Key from winit::KeyEvent ; mapping
between KeyCode and Key ; or .
- We don't receive characters through alt+numpad (e.g. alt + 151 = "ù")
anymore ; reproduced on winit example "ime". maybe related to
https://github.com/rust-windowing/winit/issues/2945
- (windows) Window content doesn't refresh at all when resizing. By
reading https://github.com/rust-windowing/winit/issues/2900 ; I suspect
we should just fire a `window.request_redraw();` from `AboutToWait`, and
handle actual redrawing within `RedrawRequested`. I'm not sure how to
move all that code so I'd appreciate it to be a follow up.
- (windows) unreleased winit fix for using set_control_flow in
AboutToWait https://github.com/rust-windowing/winit/issues/3215 ; ⚠️ I'm
not sure what the implications are, but that feels bad 🤔
## Follow up
I'd like to avoid bloating this PR, here are a few follow up tasks
worthy of a separate PR, or new issue to track them once this PR is
closed, as they would either complicate reviews, or at risk of being
controversial:
- remove CanvasParentResizePlugin
(https://github.com/bevyengine/bevy/pull/10702#discussion_r1417068856)
- avoid mentionning explicitly winit in docs from bevy_window ?
- NamedKey integration on bevy_input:
https://github.com/rust-windowing/winit/pull/3143 introduced a new
NamedKey variant. I implemented it only on the converters but we'd
benefit making the same changes to bevy_input.
- Add more info in KeyboardInput
https://github.com/bevyengine/bevy/pull/10702#pullrequestreview-1748336313
- https://github.com/bevyengine/bevy/pull/9905 added a workaround on a
bug allegedly fixed by winit 0.29. We should check if it's still
necessary.
- update to raw_window_handle 0.6
- blocked by wgpu
- Rename `KeyCode` to `PhysicalKeyCode`
https://github.com/bevyengine/bevy/pull/10702#discussion_r1404595015
- remove `instant` dependency, [replaced
by](https://github.com/rust-windowing/winit/pull/2836) `web_time`), we'd
need to update to :
- fastrand >= 2.0
- [`async-executor`](https://github.com/smol-rs/async-executor) >= 1.7
- [`futures-lite`](https://github.com/smol-rs/futures-lite) >= 2.0
- Verify license, see
[discussion](https://github.com/bevyengine/bevy/pull/8745#discussion_r1402439800)
- we might be missing a short notice or description of changes made
- Consider using https://github.com/rust-windowing/cursor-icon directly
rather than vendoring it in bevy.
- investigate [this
unwrap](https://github.com/bevyengine/bevy/pull/8745#discussion_r1387044986)
(`winit_window.canvas().unwrap();`)
- Use more good things about winit's update
- https://github.com/bevyengine/bevy/pull/10689#issuecomment-1823560428
## Migration Guide
This PR should have one.
# Objective
The name `TextAlignment` is really deceptive and almost every new user
gets confused about the differences between aligning text with
`TextAlignment`, aligning text with `Style` and aligning text with
anchor (when using `Text2d`).
## Solution
* Rename `TextAlignment` to `JustifyText`. The associated helper methods
are also renamed.
* Improve the doc comments for text explaining explicitly how the
`JustifyText` component affects the arrangement of text.
* Add some extra cases to the `text_debug` example that demonstate the
differences between alignment using `JustifyText` and alignment using
`Style`.
<img width="757" alt="text_debug_2"
src="https://github.com/bevyengine/bevy/assets/27962798/9d53e647-93f9-4bc7-8a20-0d9f783304d2">
---
## Changelog
* `TextAlignment` has been renamed to `JustifyText`
* `TextBundle::with_text_alignment` has been renamed to
`TextBundle::with_text_justify`
* `Text::with_alignment` has been renamed to `Text::with_justify`
* The `text_alignment` field of `TextMeasureInfo` has been renamed to
`justification`
## Migration Guide
* `TextAlignment` has been renamed to `JustifyText`
* `TextBundle::with_text_alignment` has been renamed to
`TextBundle::with_text_justify`
* `Text::with_alignment` has been renamed to `Text::with_justify`
* The `text_alignment` field of `TextMeasureInfo` has been renamed to
`justification`
# Objective
Fixes#10439
`Timer::percent()` and `Timer::percent_left()` return values in the
range of 0.0 to 1.0, even though their names contain "percent".
These functions should be renamed for clarity.
## Solution
- Rename `Timer::percent()` to `Timer::fraction()`
- Rename `Timer::percent_left()` to `Timer::fraction_remaining()`
---
## Changelog
### Changed
- Renamed `Timer::percent()` to `Timer::fraction()`
- Renamed `Timer::percent_left()` to `Timer::fraction_remaining()`
## Migration Guide
- `Timer::percent()` has been renamed to `Timer::fraction()`
- `Timer::percent_left()` has been renamed to
`Timer::fraction_remaining()`
# Objective
- Fixes#10133
## Solution
- Add a new example that focuses on using `Virtual` time
## Changelog
### Added
- new `virtual_time` example
### Changed
- moved `time` & `timers` examples to the new `examples/time` folder
ickshonpe