Problem:
Can't get a command's description from nvim_get_commands when
cmd is string.
Solution:
Returns "desc" field in nvim_get_commands.
`definition` is now empty when cmd is function type.
Problem: off-by-one bug in s:NetrwUnMarkFile()
Solution: Correctly loop through all buffers to unlet all variables
(J. Paulo Seibt)
When the function loops through buffers to clear s:netrwmarkfilelist_#
and s:netrwmarkfilemtch_#, it skips the last one at bufnr('$'), messing
up mark highlights and causing other functions that operate on those
arrays (like delete or rename) to target stale marked files.
The bufnr() help page says that bufnr("$") returns the highest buffer
number of existing buffers, so while ibuf < bufnr("$") does not clear
the last buffer-local arrays.
To reproduce:
Just opening a fresh Vim and running :Ex opens a netrw buffer at the
highest number. Then, typing mu after marking some files triggers the
mark highlight bug, and finally typing D would act like calling the
delete function against the previous marked files, as the buffer-local
arrays where not touched by s:NetrwUnMarkFile.
closes: vim/vim#20129https://github.com/vim/vim/commit/7ccc273a4cb6012e5afbdb94d0f2597bc01fe2fd
Co-authored-by: J. Paulo Seibt <jpseibt@gmail.com>
Problem: When closing gvim with an unsaved unnamed buffer, choosing
"Yes" in the "Save changes?" dialog and then "Cancel" in the
file selection dialog either silently writes the buffer to a
file named "Untitled" (overwriting any existing file with
that name) or discards the buffer altogether
(vibs29, after v9.1.0265).
Solution: In dialog_changed(), if browse_save_fname() leaves the buffer
without a file name, treat it as a cancel and return without
saving. Also stop clearing the modified flag in the restore
path on write failure, so the unsaved changes are kept and
the caller (e.g. gui_shell_closed()) can also cancel the
close. Pre-fill the file dialog with "Untitled" to match
the preceding "Save changes to ..." prompt. Add a test for
the write-failure path (Hirohito Higashi).
fixes: vim/vim#20132closes: vim/vim#20143https://github.com/vim/vim/commit/cf947e7ef09fc8a63f447b54b107585b8f3b7abe
Co-authored-by: Hirohito Higashi <h.east.727@gmail.com>
Problem:
When using `vim.list.unique` or `vim.list.bisect`, if the `key` function is
complex, it can degrade performance, because it is invoked on every comparison
Solution:
The `key` interface convention is designed specifically to address this issue;
performance can be improved by memoizing its results.
Also added the shorthand use of the field name string as the key.
Problem:
Nested workspace capabilities like workspace.fileOperations.didCreate and
workspace.textDocumentContent are not handled consistently for dynamic and
static registration provider lookup.
Solution:
Generate explicit registration-provider mappings from the LSP metadata and use
them when registering and querying capabilities. Add coverage for dynamic and
static nested workspace registrations.
Problem:
With 'incsearch' enabled, the window can scroll while typing a
search pattern, but WinScrolled is not triggered until the next user
action in Normal mode. The event is effectively skipped for every
scroll that happens while the search prompt is still open.
Solution:
Call may_trigger_win_scrolled_resized() after update_screen()
in may_do_incsearch_highlighting() and finish_incsearch_highlighting().
Problem:
`EBUSY` during cleanup:
Windows CI can intermittently fail `pack_spec.lua` with `EBUSY` while removing
`site/pack/core/opt/plugindirs`.
This can happen because:
- the test Nvim session may still be alive when `after_each()` removes the pack
directory
- Windows does not allow removing a directory while another process still has an
open handle below it
- startup-time `vim.pack.add()` performs a real `git clone`, so process and file
handle release timing can vary on slower runners
Startup timeout:
The startup tests can also fail before cleanup because they wait for `_G.done`
with a fixed timeout. That timeout includes the time needed for startup to run
`vim.pack.add()` and finish the local clone.
Solution:
Close before cleanup:
Capture the pack, lockfile, and log paths while the test Nvim session is still
available, then call `n.check_close()` before removing the pack directory.
Extend Windows startup wait:
Increase the `_G.done` retry budget only on Windows so startup-time
`vim.pack.add()` has more time to finish on slower CI runners.
Problem:
The `nvim_get_chan_info()` terminal channel test used `shell-test INTERACT` to verify that `jobstop()` reports an unhandled `SIGHUP` as exit code `129`.
`INTERACT` reads from stdin with `fgets()`, so closing the PTY could race with `SIGHUP` delivery. If `fgets()` observed EOF first, `shell-test` exited normally with code `0`, causing intermittent failures on slower sanitizer builds.
Solution:
Add a `shell-test HOLD` mode that prints a readiness prompt and then waits without reading stdin. Use it for the `SIGHUP` assertion so PTY EOF cannot make the helper exit normally before the signal path is observed.
Problem:
`diagnostic.status` only follows the `config.status.format` setting to determine how to display diagnostic signs. However, `signs` can actually also be configured via `config.signs.text`.
Solution:
If the user has set symbols via `config.status.format`, let that determine the content of `signs`; otherwise, use `config.signs.text` for display.
TODO: drop support `type(config.status.format) == 'table'`; users should just configure `config.signs.text` directly.
Problem: Test_termdebug_tbreak(), Test_termdebug_basic(), and
Test_termdebug_toggle_break() use synchronous assert_equal()
to check breakpoint signs immediately after sending commands
to gdb. On slow CI (ASAN, ARM64, macOS) gdb may not have
processed the response yet, causing the sign to be missing.
Solution: Wrap the three assertions in WaitForAssert() to poll until
the signs are placed, matching the pattern already used by
the other assertions in the same tests (Jesse Rosenstock).
closes: vim/vim#20133https://github.com/vim/vim/commit/20a124a6e0e2445c500ccc7c496a8fe5d334aed8
Co-authored-by: Jesse Rosenstock <jmr@google.com>
Co-authored-by: Gemini
Problem: Info popup isn't removed when selecting an item that doesn't
have "info" in cmdline completion, which is inconsistent with
Insert mode behavior.
Solution: Set pum_call_update_screen in cmdline mode (zeertzjq).
closes: vim/vim#20128https://github.com/vim/vim/commit/3bfffcc29054faff2dbec2d765317ee09e9ef827
Nvim already behaves correctly. Add a screen test as there are none.
Problem:
`gx` relies on `exepath` to get the fullpath of `cmd.exe`,
and that path must use `\`; otherwise, luv's spawn will fail.
Solution:
Revert `slash_adjust` in `exepath`, so that it still respects 'shellslash'
Problem:
This test would sometimes fail to match lines starting with `.` (indicating throttling) due to a race condition, likely because throttling completed before the test could properly assert.
Solution:
I 6x'd the amount of test data we were pushing into `nvim` in an attempt to trigger throttling consistently.
I don't _love_ this solution as it is still non-deterministic and might not hold up over time.
A good solution would be: create a deterministic way to pause neovim in a functional test, assert on the temporarily throttle state, then unpause neovim. However, it's likely this is not possible today and will take too much effort.
Before test time (30000 lines): ~0.40sec/run
After test time (150000 lines): ~1.7sec/run
This increases test runtime, but if it removes flakes I think it's worth it.
Problem: When an error line in a file passed to :cfile / :cgetfile is
longer than IOSIZE, qf_parse_file_pfx() copies the tail
into the fixed-size IObuff with STRMOVE(), overflowing the heap buffer.
The same code path can also loop indefinitely because
qf_parse_file_pfx() always returns QF_MULTISCAN when a
tail is present, and qf_init_ext() unconditionally goes
to "restofline" without bounding the tail length (Nabih).
Solution: Remove the STRMOVE() into IObuff. In the QF_MULTISCAN
branch, alias linebuf into the tail directly and update
linelen, requiring strict progress (new length less than
the previous length) before retrying; otherwise ignore
the line.
closes: vim/vim#20126
Supported by AI
https://github.com/vim/vim/commit/77677c33dec485aadd371da75cce55d449b51798
Co-authored-by: Christian Brabandt <cb@256bit.org>
Problem:
`get_node_text()` returned inconsistent results between buffer and
string sources when a node's range ends at `end_col == 0` (i.e. the node
ends with a newline). The buffer path dropped the trailing newline; the
string path included it correctly.
Solution:
Append `'\n'` in `buf_range_get_text()` when `end_col == 0` and
`start_row ~= end_row`. The `start_row ~= end_row` guard excludes
zero-width nodes at column 0, which should return `""`.
Remove the workaround in the `#trim!` directive that manually
compensated for the missing newline.
Strip whitespace in `resolve_lang()` so injection language nodes ending
at `end_col == 0` (e.g. `">lua\n"`) still resolve correctly.
Problem: tests: Test_shortmess_F3() is flaky on MS-Windows
Solution: Increase the sleep to 3s (Yasuhiro Matsumoto)
On MS-Windows time_differs() treats mtime as unchanged unless st_mtime
differs by more than 1 second, so a 2-second sleep can fall short when
the two writes straddle a second boundary. Bump the non-nanotime sleep
to 3 seconds.
closes: vim/vim#20117https://github.com/vim/vim/commit/2219c890136f4c809ca4fa64d357ae46442bfa92
Co-authored-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Problem: tests: flaky screendump Test_smoothscroll_incsearch()
Solution: Replace screendump test by WaitForAssert()
(Yasuhiro Matsumoto)
VerifyScreenDump fails consistently on the macos-15-intel CI runner.
Replace the dump comparisons with assertions that verify the actual
invariant under test: that the visible buffer view stays unchanged
across the four incremental-search keystrokes (i.e. skipcol is not
reset). Drop the now-unused dump files.
closes: vim/vim#20118https://github.com/vim/vim/commit/e25933014c1c7cc4fb40a6ed429b80fdb37ba28e
Co-authored-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Problem:
The fallback that tokenizes `eap->arg` by unescaped whitespace (when the
parser doesn't pre-split via `EX_EXPAND` etc.) lives in `nlua_do_ucmd`,
so only user-command callbacks got `eap.fargs`. Builtin commands routed
through `nlua_call_excmd` have to re-parse the args themselves
(e.g. `M.ex_lsp`).
Solution:
- Move the tokenization into `nlua_push_eap` so every Lua handler sees
`eap.fargs`. Keep only the `EX_NOSPC` override in `nlua_do_ucmd` (the
`nargs=1`/`?` case which is genuinely user-command-specific).
- Drop the re-parse in `M.ex_lsp`.
Problem: The `with-external-deps` workflow keeps failing because
adding the neovim-ppa/stable times out.
Solution: Don't add the PPA; it doesn't look to be necessary for
installing current dependencies.
Problem: popup: wrapped cmdline truncated with wildoptions=pum
Solution: Call msg_starthere() in redrawcmd() to reset lines_left
before each redraw (Yasuhiro Matsumoto).
redrawcmd() leaves lines_left at its previous value, which decrements
across successive redraws (e.g. when wildtrigger() refreshes the popup
on every keystroke) until 0, after which msg_no_more aborts drawing
the wrapped cmdline. Call msg_starthere() to reset it.
related: vim/vim#20081https://github.com/vim/vim/commit/587447ec64ffd9e6eaba329ffd9d778159ea6e32
The problem mentioned in the PR cannot be reproduced in Nvim. It's not
clear if this change will solve or cause any problems in Nvim, so let's
first try it without adding the test.
Co-authored-by: Yasuhiro Matsumoto <mattn.jp@gmail.com>
Problem: With $d='[dir]', `:e $d/file.txt` opens the wrong file,
`:e $d/<Tab>` fails to complete, and `glob('$d/*')` returns
nothing. Wildcard characters inside expanded environment
variables get picked up by globbing again.
Solution: Turn the 4th parameter of expand_env_esc() from a bool into a
string of characters to escape in each expanded value. Callers
that pass the result to wildcard expansion should include
PATH_ESC_WILDCARDS in addition to " \t" (glepnir).
closes: vim/vim#20053https://github.com/vim/vim/commit/20e98ff1cc3ffc13d42579d2bf9b9567f98595a2
Problem: Optional CI reevaluates on unrelated label events and shares
one workflow-wide concurrency group. One optional label change can
cancel in-flight jobs for the other optional suite.
Solution: Only reevaluate each optional job when its own label changes,
and move concurrency to the job level. This keeps `s390x` and
`windows-asan` from restarting each other.
Problem:
LSP clients previously did not handle dynamic registration for off-spec methods
Solution:
Update the client logic to assume support for dynamic registration when
the method is unknown. Adjust the registration provider fallback and
enhance tests to verify correct behaviour for unknown methods and their
registration options. This improves compatibility with servers using
custom dynamic registrations.
AI-assisted: OpenCode
Problem: C formatting is enforced in CI via uncrustify, but when working
on C code clangd formats on save via clang-format, forcing users to
manually run `make formatc` after they're done.
Solution: disable clang-format.
Problem:
The argument to `:help` is normalized to fit the general tag format.
I.e. i^U-default, iCTRL-U-default and i_CTRL_U-default should all point
to the i_CTRL_U-default tag. Our normalization adds an underscore around
the CTRL keycode, e.g. iCTRL-GCTRL-J becomes i_CTRL-G_CTRL-J. That's not
necessary if the following part starts with a dash, like the case of
iCTRL-U-default.
Solution:
Do not insert an underscore if the following character is a dash/minus
(-).
Olivia Kinnear